lab-it-up.com
@LabitUp1
Networking labs for EVE-NG & GNS3. Cisco, Juniper, Arista and Extreme are some of the vendors we have labs for
Some more Juniper and this time Carrier of Carriers EVPN VPLS #mpls #evpn #vpls #Juniper lab-it-up.com/juniper-carrie…
lab-it-up.com
Juniper vMX - Carrier of Carriers EVPN VPLS - Lab-It-Up
This lab is slightly different to the other Carrier of Carrier lab where LDP was used in each AS. In this lab, AS65200 is using LDP, AS65400 RSVP & AS65600 Segment Routing. 2 Cisco vIOS devices used...
Lets do some IPv6 tunnelling with segment routing on the Juniper vMX #mpls #segmentrouting #juniper lab-it-up.com/juniper-vmx-ip…
lab-it-up.com
Juniper vMX - IPv6 Tunneling over SR - Lab-It-Up
Quite a simple lab this one. A customer wants to establish IPv6 connectivity between 2 sites over our SR IPv4 core so IPv6 tunneling is required. 2 Cisco vIOS routers used as the CE devices. https:...
Juniper again! EVPN VPLS but using RSVP instead of LDP #juniper #mpls #vpls #evpn lab-it-up.com/juniper-vmx-rs…
lab-it-up.com
Juniper vMX - RSVP EVPN VPLS - Lab-It-Up
A change with this lab as RSVP will be used as the MPLS signalling protocol. IS-IS for the IGP and Cisco vIOS again used as the CE devices https://community.juniper.net/blogs/ramdas-machat/2022/11/...
Another Juniper lab. This time EVPN/VPWS with LDP as signalling protocol #mpls #juniper #evpn #vpws lab-it-up.com/juniper-vmx-ev…
lab-it-up.com
Juniper vMX - EVPN VPWS - Lab-It-Up
Cisco vIOS switches used as the CE devices and a LAG between them and the PE vMX’s. IS-IS for the underlay and LDP for the label distribution. You could use RSVP or Segment Routing if you prefer....
Some Segment Routing on Juniper next and a L3VPN #juniper #mpls #segmentrouting lab-it-up.com/vmx-segment-ro…
lab-it-up.com
Juniper vMX - Segment Routing L3VPN - Lab-It-Up
You will need a trial license from Juniper for this lab, which can be obtained from the below URL. https://www.juniper.net/gb/en/dm/vmx-trial-download.html BGP is used between the CE & PE devices....
Another MPLS EVPN lab but this time on the Cisco IOS XE platform #mpls #evpn #Cisco lab-it-up.com/ios-xe-mpls-ev…
lab-it-up.com
Cisco IOS XE - MPLS EVPN - Lab-It-Up
IS-IS is used for the underlay. The 2 CEs are Cisco vIOS switches with VLAN 2222 and OSPF configured on them. https://www.cisco.com/c/en/us/td/docs/routers/ios/config/17-x/mpls/b-mpls/m-evpn-over-m...
Back to Arista today and some MPLS EVPN but using Segment Routing rather than LDP or RSVP #arista #mpls #evpn #segmentrouting lab-it-up.com/arista-segment…
lab-it-up.com
Arista - Segment Routing MPLS EVPN - Lab-It-Up
IS-IS used for the segment routing. 2 Cisco vIOS devices for the CE’s, with OSPF configured on each https://www.arista.com/en/solutions/mpls-segment-routing PE1 P1 P2 P3 PE2 OSPF should now be up...
Another Juniper lab. Inter AS Option C MPLS EVPN #mpls #juniper #evpn lab-it-up.com/inter-as-mpls-…
lab-it-up.com
Juniper Inter-AS MPLS EVPN Option C - Lab-It-Up
This topology is Option C utilising BGP-LU. IS-IS in the underlay and OSPF between the 2 CE Cisco devices. Can use other devices as CE’s if you prefer. https://www.juniper.net/documentation/en_US/r...
Juniper for this lab. Carrier of Carriers L2VPN #juniper #mpls lab-it-up.com/carrier-of-car…
Another L3VPN but this time it's Arista #mpls #l3vpn #arista lab-it-up.com/arista-l3vpn/
lab-it-up.com
Arista L3VPN - Lab-It-Up
Another L3VPN and the usual topology. IS-IS in the underlay and BGP between PE’s & CE’s. vEOS1 vEOS2 vEOS3 vEOS4 vEOS5 Cisco vIOS routers used as the CE’s. It doesn’t appear that Arista has the...
Another L3VPN but this time using Ocnos from IPInfusion. #mpls #l3vpn lab-it-up.com/ocnos-l3vpn/
lab-it-up.com
OcNOS - L3VPN - Lab-It-Up
OcNOS is an open network operating system produced by IP Infusion. A copy of the software to use with EVE-NG or GNS3 can be downloaded from their website (click below). This lab is a simple L3VPN....
Back to the Junos Evolved platform but this time a L3VPN #juniper #junos #l3vpn #mpls lab-it-up.com/juniper-l3vpn/
lab-it-up.com
Juniper vJunosEvolved - L3VPN - Lab-It-Up
An example Juniper L3VPN configuration example. IS-IS underlay and BGP between PE’s & CE’s. https://www.juniper.net/documentation/us/en/software/junos/vpn-l3/topics/example/mpls-qfx-series-vpn-laye...
A bit of EVPN/VPWS today on the Cisco IOS XE platform #cisco #evpn #l2vpn lab-it-up.com/cisco-evpn-vpw…
lab-it-up.com
Cisco IOS-XE EVPN/VPWS - Lab-It-Up
Aim of this lab is to create a layer 2 circuit between switch6 & switch7 and form an OSPF adjacency. IS-IS is used for the underlay as it’s better (it really is!). https://www.cisco.com/c/en/us/td/...
An Aruba VXLAN/EVPN lab today #aruba #vxlan #evpn lab-it-up.com/aruba-vxlan-ev…
lab-it-up.com
Aruba VXLAN/EVPN - Lab-It-Up
Another VXLAN/EVPN lab but this time from Aruba. Usual spine/leaf topology and OSPF used as underlay because IS-IS is not supported by the CX image. Spine1 Spine2 Leaf1 Leaf2 Leaf3 vPC6 & vPC8 are in...
Can't mention networking without Cisco so here is the first Cisco lab. A L3VPN on the IOS XR platform #cisco #mpls #ldp #l3vpn lab-it-up.com/ios-xr-l3vpn/
lab-it-up.com
Cisco IOS-XR - L3VPN - Lab-It-Up
Topology below. Juniper vMX devices used as CE’s but you are free to use whatever you would like. BGP is used between PE’s & CE’s but you could use another protocol if you prefer. The MPLS core has...
Arista lab this time. Spine/leaf VXLAN/EVPN #arista #vxlan #evpn lab-it-up.com/arista-vxlan-e…
lab-it-up.com
Arista VXLAN/EVPN - Lab-It-Up
Spine/leaf topology with OSPF underlay and Spines acting as Route Reflectors https://www.arista.com/en/um-eos/eos-vxlan-configuration EVE-NG Import file Spine1 Spine2 Leaf1 Leaf2 Leaf3 Confirm the...
Lets have a break from Juniper and give Extreme a chance. This lab is SPBm (Fabric Connect). A proprietary alternative to VXLAN?EVPN lab-it-up.com/spbm/
lab-it-up.com
Extreme VOSS SPBm - Lab-It-Up
SPBm is a layer 2 technology that utilises IS-IS to form adjacencies between devices and share MAC address information. More detailed information can be found in link below https://documentation.ex...
Another Juniper lab. This time QinQ lab-it-up.com/qinq/ #juniper #gns3 #eveng
lab-it-up.com
Juniper QinQ - Lab-It-Up
A very simple topology for this one. 3 vMX devices, 2 Arista vEOS acting as the CE devices (you can use other devices if prefer) and 2vPC’s to confirm IP connectivity. 55 is the C-Tag, 110 the S-Tag...
Hi all. Hope some of you might find this lab useful. It's MPLS EVPN on the Junos Evolved Platform #juniper #mpls #evpn lab-it-up.com/vjunosevolved-…
lab-it-up.com
Juniper vJunosEvolved - MPLS EVPN - Lab-It-Up
MPLS EVPN is slightly different on JunosEvolved as it uses a mac-vrf routing instance rather than an evpn instance. A lot of similarities though and topology and EVE NG import below. 2 Cisco vIOS...
United States Trends
- 1. #CARTMANCOIN 1,746 posts
- 2. Broncos 66.6K posts
- 3. yeonjun 227K posts
- 4. Raiders 66.4K posts
- 5. Bo Nix 18.3K posts
- 6. Geno 18.8K posts
- 7. Sean Payton 4,809 posts
- 8. daniela 48.1K posts
- 9. #criticalrolespoilers 5,066 posts
- 10. Kehlani 9,900 posts
- 11. Kenny Pickett 1,513 posts
- 12. #TNFonPrime 4,050 posts
- 13. #Pluribus 2,830 posts
- 14. Pete Carroll 2,004 posts
- 15. Jalen Green 7,715 posts
- 16. Chip Kelly 1,990 posts
- 17. Danny Brown 3,108 posts
- 18. #PowerForce N/A
- 19. Bradley Beal 3,627 posts
- 20. TALK TO YOU OUT NOW 28.3K posts
Something went wrong.
Something went wrong.