你可能會喜歡
🌟 Editor's Pick Prof. Dongdong Gu’s group (NUAA) explores graded Ti6Al4V/AlMgScZr multi-materials fabricated via Laser Powder Bed Fusion (LPBF). 🔗 doi.org/10.36922/msam.… #AdditiveManufacturing #LPBF #FunctionallyGradedMaterials #TitaniumAlloy #MaterialsScience
🌟 Editor's Pick Prof. Amit Bandyopadhyay’s group (WSU) demonstrates multi-material Ti6Al4V–B₄C structures via DED-based #AdditiveManufacturing. 🔗 doi.org/10.36922/msam.… #3DPrinting #DED #TitaniumAlloy #MaterialsScience
🚀 New Research Paper Optimizing #3DPrinting parameters for lightweight and high-strength unmanned aerial vehicle parts 🔗 accscience.com/journal/MSAM/5… #AdditiveManufacturing #3DPrinting #UAV #Optimization
📢 Freshly Published Research! “On the surface integrity resulting from laser powder bed fusion of Ti6Al4V: Improvements by cavitation abrasive surface finishing” 👉 accscience.com/journal/MSAM/5… #AdditiveManufacturing #Ti6Al4V #LPBF #3DPrinting #MaterialsScience #SurfaceFinishing
📢 Freshly Published Research! “Effect of hot isostatic pressing on the #microstructure and mechanical properties of porous Ti-6Al-4V #alloy manufactured by laser powder bed fusion” 👉 accscience.com/journal/MSAM/5… #AdditiveManufacturing #Ti6Al4V #LPBF #3DPrinting #MaterialsScience
📢 Freshly Published Review Article! “Influence of porous structures on the degradation behavior of additively manufactured magnesium and magnesium alloy orthopedic implants” 👉 accscience.com/journal/MSAM/5… #AdditiveManufacturing #MagnesiumAlloys #MaterialsScience
📢 Freshly Published Research! “Personalized antimicrobial and soundproof earplugs through embedded-suspension 3D printing of PDMS-Ag composites for the prevention of swimmers’ otitis externa” 👉 accscience.com/journal/MSAM/5… #AdditiveManufacturing #MaterialsScience
🎉 We are proud to share that 46 Editorial Board Members of Materials Science in Additive Manufacturing (MSAM) have been recognized in Stanford’s World’s Top 2% Scientists 2025 List! 👏 #MSAM #AdditiveManufacturing #StanfordTop2Percent
📢 Freshly Published Research! “Study on the printing stability of Invar 36 alloy under different process parameter conditions in gas metal arc #additivemanufacturing” 👉 accscience.com/journal/MSAM/4… #AdditiveManufacturing #Invar36 #3DPrinting #MaterialsScience #WireArcAM
🚀 Special Issue: Materials Processing through Hybrid #AdditiveManufacturing 📅 Submission Deadline: 31 Mar 2026 🔗 accscience.com/journal/MSAM/s… #3DPrinting #MaterialScience
📢 Freshly Published Research! “Microstructure and mechanical properties of additively manufactured GH4099 superalloy” 👉 accscience.com/journal/MSAM/4… #AdditiveManufacturing #Superalloys #3DPrinting #MaterialsScience
🔥 Most Downloaded in 2024! “3D printing soft robots integrated with low-melting-point alloys” 👉 doi.org/10.36922/msam.… #3DPrinting #SoftRobotics #AdditiveManufacturing #EnergyEfficiency
🔬 Freshly Published Review! “Review of research and developments in binders for binder jetting #additivemanufacturing” 👉 accscience.com/journal/MSAM/4… #3DPrinting #BinderJetting #MaterialsScience
🚀 Special Issue: Additive Manufacturing of High Performance Ceramics 📅 Submission Deadline: 20 Jan 2026 🔗 accscience.com/journal/MSAM/s… #AdditiveManufacturing #3DPrinting #Ceramics #MSAM
🔬 Freshly Published Article! “Effects of titanium diboride nanoparticles on the #microstructure and mechanical properties of VZh159 nickel-based superalloy fabricated using #SelectiveLaserMelting” 👉 accscience.com/journal/MSAM/4… #AdditiveManufacturing #Superalloys #3DPrinting
🔬 NEW in MSAM “Elaboration of complex aluminum nitride parts by #binderjetting: Optimization of printing parameters and powder characteristics” 👉 accscience.com/journal/MSAM/4… #AdditiveManufacturing #Ceramics #3DPrinting #AluminumNitride
🔬 NEW in MSAM “Microstructure, phase evolution, and properties of laser powder bed fusion-fabricated Ni50Ti50/Ni-rich NiTi multi-material structures” 👉 accscience.com/journal/MSAM/4… #AdditiveManufacturing #NiTi #ShapeMemoryAlloy #3DPrinting
🚀 Special Issue: Multi-Material Additive Manufacturing: Techniques, Materials, and Applications 📅 Submission Deadline: 20 Dec 2025 🔗 accscience.com/journal/MSAM/s… #AdditiveManufacturing #3DPrinting #MMAM
🔬 NEW in MSAM “Influence of tool head geometry on in situ monitoring of temperature, force, and torque during additive friction deposition of aluminum alloy 2219” 👉 accscience.com/journal/MSAM/4… #AdditiveManufacturing #AFSD #3DPrinting
📄 NEW REVIEW ARTICLE! #RapidPrototyping of microstrip patch #antenna design: A review and bibliometric analysis for future research directions 🔗 doi.org/10.36922/MSAM0… #3DPrinting #Antennas #AdditiveManufacturing
United States 趨勢
- 1. Vikings 32.8K posts
- 2. Wentz 9,697 posts
- 3. Chargers 42.2K posts
- 4. Herbert 12.2K posts
- 5. #Skol 3,937 posts
- 6. #911onABC 12.5K posts
- 7. Brosmer 1,647 posts
- 8. #TNFonPrime 1,821 posts
- 9. Ladd 4,086 posts
- 10. Pacers 13.8K posts
- 11. Oronde Gadsden 3,381 posts
- 12. #Blackhawks 1,489 posts
- 13. $UNI 2,247 posts
- 14. #BoltUp 2,551 posts
- 15. Quentin Johnston N/A
- 16. Taylor Raddysh N/A
- 17. Dallas Turner N/A
- 18. Sharks 11.6K posts
- 19. Rempe 4,053 posts
- 20. Celebrini 2,773 posts
Something went wrong.
Something went wrong.