你可能會喜歡
PR.9421 Power supply - Supply voltage 85...132 VAC or 187...264 VAC - Optional connection of backup supply - Approved for installation in I.S. / Ex zone 2 / Div. 2 - Active signal output - Optional parallel connection. For more details contact us [email protected]
PR.9410 Power control unit - Distributes supply voltage to the power rail - Optional connection of backup supply - Approved for installation in I.S. / Ex zone 2 / Div. 2 - Must be installed on power rail, PR type 9400 For more details contact us [email protected]
9203B Solenoid / alarm driver - Universal Ex driver for solenoids, acoustic alarms & LEDs - Extended self-diagnostics - 1 or 2 channels - Can be supplied separately or installed on power rail, PR 9400 - SIL 2-certified via Full Assessment contact us at [email protected]
PR.9202B Pulse isolator - Interface for NAMUR sensors and switches - Extended self-diagnostics and detection of cable fault - 1 or 2 channels - Can be supplied separately or installed on power rail, PR type 9400 - SIL 2-certified via Full Assessment Contact us at [email protected]
PR.9116B Universal converter - Input for RTD, TC, Ohm, potentiometer, mA and V - Supply for 2-wire transmitters - Active / passive mA output and relay output - Can be supplied separately or installed on power rail - SIL 2-certified via Full Assessment. contact us [email protected]
PR.9113B Temperature / mA converter - Input for RTD, TC and mA - Active / passive mA output via the same two terminals 1 or 2 channels - Can be supplied separately or installed on power rail, PR type 9400 - SIL 2-certified via Full Assessment Contact us at [email protected]
9107B HART transparent driver - 24 VDC supply via power rail or connectors - Fast response time - High active output load 725 Ohm / 20 mA - Output line fault detection via status relay - SIL2 certified via Full Assessment according to IEC 61508 Contact us at [email protected]
PR.9106B HART transparent repeater - 24 VDC supply via power rail or connectors - Active and passive mA input - Active or passive output via the same two terminals - Splitter function - 1 in and 2 out - SIL3 Full Assessment and certified acc. to IEC61508 Contact us [email protected]
PR.7501 Field mounted HART temperature transmitter - RTD, TC, Ohm, and bipolar mV input and analog output - High definition local operator interface (LOI) with 3 optical buttons - Selectable red or white backlight For more details contact us at [email protected]
PR.5909 Loop Link communications interface - USB connection - For PReset version 5.0 or higher - Used for the configuration of these devices: 511x, 522x, 533x,571x,633x,643x . For more details contact us at [email protected]
PR.5715 Programmable LED indicator - 4-digit 14-segment LED display - Input for mA, V, Ohm, RTD, TC and potentiometer - 4 relays and analog output - Universal supply - Programmable via front keys and PC For more details contact us at [email protected]
PR.5714 Programmable LED indicator - 4-digit 14-segment LED display - Input for mA, V, Ohm, RTD, TC and potentiometer - 2 relays and analog output - Universal supply - Front key programmable. For more details contact us at [email protected]
PR.5334A 2-wire programmable transmitter - TC input - High measurement accuracy - Galvanic isolation - Programmable sensor error value - For DIN form B sensor head mounting For more details contact us at [email protected]
PR.5333D 2-wire programmable transmitter - RTD or Ohm input - High measurement accuracy - 3-wire connection - Programmable sensor error value - For DIN form B sensor head mounting For more details contact us at [email protected]
PR.5331D 2-wire programmable transmitter - RTD, TC, Ohm, or mV input - Extremely high measurement accuracy - 1.5 kVAC galvanic isolation - Programmable sensor error value - For DIN form B sensor head mounting For more details contact us at [email protected]
PR.5331A 2-wire programmable transmitter - RTD, TC, Ohm, or mV input - Extremely high measurement accuracy - 1.5 kVAC galvanic isolation - Programmable sensor error value - For DIN form B sensor head mounting. For more details contact us at [email protected]
5225A Programmable f/I-f/f converter - Pulse conditioning - Frequency generator - Concurrent f/I and f/f function - Analog current and voltage output - PNP / NPN output, optional relays - Programmable by PC and Loop Link. For more details [email protected]
PR.5202B Pulse isolator - 2 channels - 2 or 4 outputs - Dual output - 5-port 3.75 kVAC galvanic isolation - Cable error detection - Universal supply by AC or DC For more details contact us at [email protected]
PR.5116B Programmable transmitter - Input for RTD, TC, mV, Ohm, potentiometer, mA and V - 2-wire supply > 16.5 V to Ex zone 0 - Bipolar voltage input - Output for current, voltage and 2 relays - Universal supply by AC or DC For more details contact us at [email protected]
PR.5114A Programmable transmitter - Input for RTD, TC, mV, linear resistance, mA, and V - 3-port 3.75 kVAC galvanic isolation - Current and voltage output - Universal voltage supply - 1- and 2-channel versions - Loop supply > 17.1 V For more details contact us at [email protected]
United States 趨勢
- 1. Good Wednesday 24.7K posts
- 2. #LoveYourW2025 165K posts
- 3. #wednesdaymotivation 5,408 posts
- 4. #VxWKOREA 43K posts
- 5. Hump Day 9,949 posts
- 6. Markey N/A
- 7. And the Word 75.4K posts
- 8. #WednesdayWisdom N/A
- 9. #15Oct 3,307 posts
- 10. Happy Hump 6,123 posts
- 11. St. Teresa of Avila 1,973 posts
- 12. Moulton N/A
- 13. Raila Odinga 172K posts
- 14. LEE KNOW FOR HARPERS BAZAAR 6,661 posts
- 15. Tami 5,079 posts
- 16. Young Republicans 94.3K posts
- 17. Kenya 129K posts
- 18. George Floyd 37.6K posts
- 19. Baba 132K posts
- 20. cate 4,751 posts
Something went wrong.
Something went wrong.