#pidp11 risultati di ricerca

Finally got around to finishing my #pidp11. Works great!

jdarrelthomas's tweet image. Finally got around to finishing my #pidp11. Works great!

Well look at that... logged in on a PDP-11, running 2.11 BSD Unix, from a vt100. Well, actually a #pidp11, and #linux terminal configured with VT font emulation (looks like a crt) with #bsd running inside simh simulating a PDP-11/70. #history #vintagecomputing #retrocomputing

f_dion's tweet image. Well look at that... logged in on a PDP-11, running 2.11 BSD Unix, from a vt100.

Well, actually a #pidp11, and #linux terminal configured with VT font emulation (looks like a crt) with #bsd running inside simh simulating a PDP-11/70.
#history #vintagecomputing
#retrocomputing
f_dion's tweet image. Well look at that... logged in on a PDP-11, running 2.11 BSD Unix, from a vt100.

Well, actually a #pidp11, and #linux terminal configured with VT font emulation (looks like a crt) with #bsd running inside simh simulating a PDP-11/70.
#history #vintagecomputing
#retrocomputing

The hot glue finally congealed around the SD card extenstion so I buttoned up the back case for now. have a panel mount HDMI connector on the way and will add RS232 DB9 connectors later. #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. The hot glue finally congealed around the SD card extenstion so I buttoned up the back case for now. have a panel mount HDMI connector on the way and will add RS232 DB9 connectors later. #PiDP11 #pdp11 #RetroComputing

Looks like I have some work to do! #pidp11

jdarrelthomas's tweet image. Looks like I have some work to do! #pidp11

And so it begins 🤓 #pidp11

troglobit's tweet image. And so it begins 🤓 #pidp11

This was a lot of fussy soldering and mechanical fitting. It’s almost done! #PiDP11 #RetroComputing

NW62's tweet image. This was a lot of fussy soldering and mechanical fitting. It’s almost done! #PiDP11 #RetroComputing

Starting the build of the #PiDP11 by mounting and soldering 37 diodes in place. #RetroComputing

mark_lawler's tweet image. Starting the build of the #PiDP11 by mounting and soldering 37 diodes in place.  #RetroComputing
mark_lawler's tweet image. Starting the build of the #PiDP11 by mounting and soldering 37 diodes in place.  #RetroComputing
mark_lawler's tweet image. Starting the build of the #PiDP11 by mounting and soldering 37 diodes in place.  #RetroComputing

Haven't started soldering yet, but I have the Pi up and running. Looks neat. Might add another Pi or two as serial terminals to add to the authenticity. #pidp11

jdarrelthomas's tweet image. Haven't started soldering yet, but I have the Pi up and running. Looks neat. Might add another Pi or two as serial terminals to add to the authenticity. #pidp11

Followed by 12 resistors. Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing

mark_lawler's tweet image. Followed by 12 resistors.  Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing
mark_lawler's tweet image. Followed by 12 resistors.  Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing
mark_lawler's tweet image. Followed by 12 resistors.  Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing
mark_lawler's tweet image. Followed by 12 resistors.  Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing

My latest hobby is working nicely! #PiDP11

Elliotd123's tweet image. My latest hobby is working nicely!
#PiDP11

Next comes the IC socket for the UDN2981A chip that will drive all of the LEDs that will be hooked up to the diode matrix. #PiDP11 #RetroComputing

mark_lawler's tweet image. Next comes the IC socket for the UDN2981A chip that will drive all of the LEDs that will be hooked up to the diode matrix. #PiDP11 #RetroComputing

I love factory visits! This $250k CNC router cuts out 100 front panels for my PiDP-11 replica in one go. Every month, self-calibrating, never a mistake, 0.1mm precision. But takes a lot of experience to operate (i.e., not me). #PIDP11 #PDP11

Oscar_CEDS's tweet image. I love factory visits! 

This $250k CNC router cuts out 100 front panels for my PiDP-11 replica in one go. Every month, self-calibrating, never a mistake, 0.1mm precision. But takes a lot of experience to operate (i.e., not me).
#PIDP11 #PDP11

All the LEDs are in. Now for the 2 rotary encoders. #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. All the LEDs are in.  Now for the 2 rotary encoders.  #PiDP11 #pdp11 #RetroComputing

Obligatory PiDP-11 unboxing / #knolling shot… 👀 #PiDP11

itgrrl's tweet image. Obligatory PiDP-11 unboxing / #knolling shot…  👀

#PiDP11

It's alive!!! Running some tests before installing the switches. #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. It's alive!!!  Running some tests before installing the switches.  #PiDP11 #pdp11 #RetroComputing

The 21 switches now mounted correctly. 2 of them are still not perfect electrically in terms of off/on being 100% reliable though. Perhape it'll act more like a 50 year old machine? Lol #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. The 21 switches now mounted correctly.  2 of them are still not perfect electrically in terms of off/on being 100% reliable though.  Perhape it'll act more like a 50 year old machine? Lol #PiDP11 #pdp11 #RetroComputing
mark_lawler's tweet image. The 21 switches now mounted correctly.  2 of them are still not perfect electrically in terms of off/on being 100% reliable though.  Perhape it'll act more like a 50 year old machine? Lol #PiDP11 #pdp11 #RetroComputing

Just assembled this PiDP-11/70 kit. It runs a bunch of original OSs, displaying the real lights. BSD 2.11 is surprisingly complete! Took five hours to assemble. Definitely recommended! #pidp11

lkesteloot's tweet image. Just assembled this PiDP-11/70 kit. It runs a bunch of original OSs, displaying the real lights. BSD 2.11 is surprisingly complete! Took five hours to assemble. Definitely recommended! #pidp11

26 switches to install. Some off/on and others momentary on. Trying not to solder any upside down (I almost totally screwed up 21 of them!). Good news is Oscar provides handy spacing guides that also tells you the type, color, and direction. #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. 26 switches to install.  Some off/on and others momentary on. Trying not to solder any upside down (I almost totally screwed up 21 of them!).  Good news is Oscar provides handy spacing guides that also tells you the type, color, and direction. #PiDP11 #pdp11 #RetroComputing
mark_lawler's tweet image. 26 switches to install.  Some off/on and others momentary on. Trying not to solder any upside down (I almost totally screwed up 21 of them!).  Good news is Oscar provides handy spacing guides that also tells you the type, color, and direction. #PiDP11 #pdp11 #RetroComputing
mark_lawler's tweet image. 26 switches to install.  Some off/on and others momentary on. Trying not to solder any upside down (I almost totally screwed up 21 of them!).  Good news is Oscar provides handy spacing guides that also tells you the type, color, and direction. #PiDP11 #pdp11 #RetroComputing
mark_lawler's tweet image. 26 switches to install.  Some off/on and others momentary on. Trying not to solder any upside down (I almost totally screwed up 21 of them!).  Good news is Oscar provides handy spacing guides that also tells you the type, color, and direction. #PiDP11 #pdp11 #RetroComputing

Nessun risultato per "#pidp11"
Nessun risultato per "#pidp11"

Finally got around to finishing my #pidp11. Works great!

jdarrelthomas's tweet image. Finally got around to finishing my #pidp11. Works great!

Looks like I have some work to do! #pidp11

jdarrelthomas's tweet image. Looks like I have some work to do! #pidp11

The hot glue finally congealed around the SD card extenstion so I buttoned up the back case for now. have a panel mount HDMI connector on the way and will add RS232 DB9 connectors later. #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. The hot glue finally congealed around the SD card extenstion so I buttoned up the back case for now. have a panel mount HDMI connector on the way and will add RS232 DB9 connectors later. #PiDP11 #pdp11 #RetroComputing

Well look at that... logged in on a PDP-11, running 2.11 BSD Unix, from a vt100. Well, actually a #pidp11, and #linux terminal configured with VT font emulation (looks like a crt) with #bsd running inside simh simulating a PDP-11/70. #history #vintagecomputing #retrocomputing

f_dion's tweet image. Well look at that... logged in on a PDP-11, running 2.11 BSD Unix, from a vt100.

Well, actually a #pidp11, and #linux terminal configured with VT font emulation (looks like a crt) with #bsd running inside simh simulating a PDP-11/70.
#history #vintagecomputing
#retrocomputing
f_dion's tweet image. Well look at that... logged in on a PDP-11, running 2.11 BSD Unix, from a vt100.

Well, actually a #pidp11, and #linux terminal configured with VT font emulation (looks like a crt) with #bsd running inside simh simulating a PDP-11/70.
#history #vintagecomputing
#retrocomputing

And so it begins 🤓 #pidp11

troglobit's tweet image. And so it begins 🤓 #pidp11

Haven't started soldering yet, but I have the Pi up and running. Looks neat. Might add another Pi or two as serial terminals to add to the authenticity. #pidp11

jdarrelthomas's tweet image. Haven't started soldering yet, but I have the Pi up and running. Looks neat. Might add another Pi or two as serial terminals to add to the authenticity. #pidp11

My latest hobby is working nicely! #PiDP11

Elliotd123's tweet image. My latest hobby is working nicely!
#PiDP11

Starting the build of the #PiDP11 by mounting and soldering 37 diodes in place. #RetroComputing

mark_lawler's tweet image. Starting the build of the #PiDP11 by mounting and soldering 37 diodes in place.  #RetroComputing
mark_lawler's tweet image. Starting the build of the #PiDP11 by mounting and soldering 37 diodes in place.  #RetroComputing
mark_lawler's tweet image. Starting the build of the #PiDP11 by mounting and soldering 37 diodes in place.  #RetroComputing

I love factory visits! This $250k CNC router cuts out 100 front panels for my PiDP-11 replica in one go. Every month, self-calibrating, never a mistake, 0.1mm precision. But takes a lot of experience to operate (i.e., not me). #PIDP11 #PDP11

Oscar_CEDS's tweet image. I love factory visits! 

This $250k CNC router cuts out 100 front panels for my PiDP-11 replica in one go. Every month, self-calibrating, never a mistake, 0.1mm precision. But takes a lot of experience to operate (i.e., not me).
#PIDP11 #PDP11

This was a lot of fussy soldering and mechanical fitting. It’s almost done! #PiDP11 #RetroComputing

NW62's tweet image. This was a lot of fussy soldering and mechanical fitting. It’s almost done! #PiDP11 #RetroComputing

Followed by 12 resistors. Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing

mark_lawler's tweet image. Followed by 12 resistors.  Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing
mark_lawler's tweet image. Followed by 12 resistors.  Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing
mark_lawler's tweet image. Followed by 12 resistors.  Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing
mark_lawler's tweet image. Followed by 12 resistors.  Making sure the color bands are all oriented the same way only for aesthetics. #PiDP11 #RetroComputing

All the LEDs are in. Now for the 2 rotary encoders. #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. All the LEDs are in.  Now for the 2 rotary encoders.  #PiDP11 #pdp11 #RetroComputing

Looks like I have a fun project for the new year. Thanks @Cnidarium ! #PiDP11

LithoChasm's tweet image. Looks like I have a fun project for the new year. Thanks @Cnidarium ! #PiDP11

Just assembled this PiDP-11/70 kit. It runs a bunch of original OSs, displaying the real lights. BSD 2.11 is surprisingly complete! Took five hours to assemble. Definitely recommended! #pidp11

lkesteloot's tweet image. Just assembled this PiDP-11/70 kit. It runs a bunch of original OSs, displaying the real lights. BSD 2.11 is surprisingly complete! Took five hours to assemble. Definitely recommended! #pidp11

Next comes the IC socket for the UDN2981A chip that will drive all of the LEDs that will be hooked up to the diode matrix. #PiDP11 #RetroComputing

mark_lawler's tweet image. Next comes the IC socket for the UDN2981A chip that will drive all of the LEDs that will be hooked up to the diode matrix. #PiDP11 #RetroComputing

It's alive!!! Running some tests before installing the switches. #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. It's alive!!!  Running some tests before installing the switches.  #PiDP11 #pdp11 #RetroComputing

The 21 switches now mounted correctly. 2 of them are still not perfect electrically in terms of off/on being 100% reliable though. Perhape it'll act more like a 50 year old machine? Lol #PiDP11 #pdp11 #RetroComputing

mark_lawler's tweet image. The 21 switches now mounted correctly.  2 of them are still not perfect electrically in terms of off/on being 100% reliable though.  Perhape it'll act more like a 50 year old machine? Lol #PiDP11 #pdp11 #RetroComputing
mark_lawler's tweet image. The 21 switches now mounted correctly.  2 of them are still not perfect electrically in terms of off/on being 100% reliable though.  Perhape it'll act more like a 50 year old machine? Lol #PiDP11 #pdp11 #RetroComputing

Loading...

Something went wrong.


Something went wrong.


United States Trends