#pimowbot kết quả tìm kiếm

#piMowBot #robotmakers #3Dprint One of my robotic lawnmowers will get a BobyCar top. It will be a 4WD mower. I've sketched an omniwheel 150mm diamter for it please cross your fingers that it will work after 15 hours of printing. @kevsmac I will try TPU for the small 16 rolls

A sunny #MagPiMonday & big thanks @Ullisun58 for sharing this video of his MINI doing a test run of latest version of #PiMowBot software. He drives his MINI manually with #RControlBLE, on the right side you can see the enhanced WebUI with the visualization of the control data.

Great test run, a big thank you to @ullisun58 for testing this new feature of the latest beta version of the #PiMowBot software. Is now the time to upgrade the PiMowBot Model D with servo controlled ToF-LiDAR? What do you think?

Hi on this beautiful #MagPiMonday It's not Wall-E who cleans my room, it's my MINI #PiMowBot. I use it for the development of bigger Lawn Mowers. The DC Motors are really strong and the remote control reacts directly as you can see. That's fun

During the last months i created several Remotecontrols as you see for my Raspberry Pi based #PiMowBot and my own RoπLawnMow Project. Now it's time to write an Android-App, hope I can show some test drives soon. Indoor it works perfect. So be connected :-) @TGD_Consulting

Happy #MagPiMonday to all robotics fans and a big thank you @ullisun58 for sharing his test run of the latest release of the #PiMowBot software with his MINI on his indoor lawn test field. #make #RPi #smart #3dprinted #IoT #lawn mower #robot

#robotics #lawnmower @orionrobots @scottmonaghan yesterday I implemented the PiCAM Rebol Modul of @TGD_Consulting #pimowbot SW. The first test was fantastic. Here without Perimeter Sensors only with ToF and Camera. You can watch the cpl. Video youtube.com/watch?v=yV2sjd… have fun!

#PiMowBot @TGD_Consulting #robotics #LawnMower Today I created a new testszenario for predefined trips in the PiMowBotIt-SW have a short look. This is only with 8 Tics per rev. You can imagine how precise it is with up to 1100 Tics per revolution

#LawnMow #Robotics Today we achieved a new Milestone! I just tested the new #pimowbot IT-SW from @TGD_Consulting . Since today it is also possible to use BL Motors withe the SW. You can simply select it in the options file. Great progress! I controlled my Dev Robot with BLE RC

Happy #roπLawnMow ! Today I assembled the ZS Expander Boards and wired them to the pi have a look. The Pi HAT is one of my prototypes. Now the engines will operate with pure #PiMowBot SW of @TGD_Consulting

I have again tinkered a bit with the #PicoW RC-BLE of the #PiMowBot. Now also some information of PiMowBot's telemetry is sent via #Bluetooth to the remote control. E.g. the battery voltage as shown here. Latest #Micropython code @github repository. #make #smart #RPi #robotics

Hi #robotics and lawn #mower fans. Based of the results yesterday I start a new project. In an old robolinho case is space for the Pi and the ZS-X11H controllers. The Software is based on @TGD_Consulting #pimowbot with some extra code for brushless motors Thx Dirk in advance

Hello all #robotics enthusiasts, today i finished my short construction to drive brushless Motors via ZS-X11H and especially to decode the Hall Impulses. This is now the base to turn the #pimowbot exactly for e.g. a quarter Circle sorry Video is in German language

display in action... TGD auf X: „Coming soon: RControlBLE for your #PiMowBot. Easy remote control with @Raspberry_Pi #PicoW #Bluetooth #BLE. More info at one of the next #MagPiMonday #MagPiTuesday https://t.co/5ibnHfxtau“ / X ()

Coming soon: RControlBLE for your #PiMowBot. Easy remote control with @Raspberry_Pi #PicoW #Bluetooth #BLE. More info at one of the next #MagPiMonday #MagPiTuesday

No, it is only a test if 4WD is a possibility to drive an own construction of lawn mower like the #PiMowBot as @TGD_Consulting did.

A short videos of my #PiMowBot indoor test system cruising around. Power is supplied by 2S LiFePO4 18650 batteries and a step-down module to 5V. With 5V, the drive is unfortunately not quite as fast. But it is enough for test drives. #make #smart #IoT #robot #RaspberryPi

Happy #MagPiMonday! The drive of my indoor test #PiMowBot is now ready to go. I've wired the L298N driver to the PiZeroW.

Happy #MagPiMonday! This weekend TimE and I have updated the wiring drawing of the actors for the #PiMowBot Model D, the illustration shows the current parts now. Check out the project site and build your own #3Dprinted #smart #IoT #robotics #lawnmower based on the #RaspberryPi.

Hello #MagPiMonday Folk. News from my MINI #PiMowBot with that pivoting ToF sensor on top. Now the image of the PiCam display some rectangles during the visual obstical detection. #make #3Dprinting #IoT #smart #robotics #lawnmower with #RaspberryPi inside.

Hello #MagPiTuesday crowd, This is what I'm working on right now. An indoor #PiMowBot for testing. I still have to wire some lines before the first cruise of this robot can be done. #make #smart #IoT with #RaspberryPi #robotics #MagPiMonday

During the last months i created several Remotecontrols as you see for my Raspberry Pi based #PiMowBot and my own RoπLawnMow Project. Now it's time to write an Android-App, hope I can show some test drives soon. Indoor it works perfect. So be connected :-) @TGD_Consulting

Hi on this sunny #magPiMonday I found in the toys box of my children this 4 wheel driven gear and in my sparepart box theese servos / sensors and a Pico. Now it is time to create a 4wheel driven robot as POC of a 4WD lane mower #Robotics MINI #PiMowBot @TGD_Consulting

Hi #robotics and lawn #mower fans. Based of the results yesterday I start a new project. In an old robolinho case is space for the Pi and the ZS-X11H controllers. The Software is based on @TGD_Consulting #pimowbot with some extra code for brushless motors Thx Dirk in advance

I want to share news from my MINI #PiMowBot . He has grown up. Now its a huge lawn mower. The PiZero is now a Pi3 wheels diameter is 23cm. This weekend a run some outdoor tests with @TGD_Consulting latest #PiMowBot IT SW watch my Video youtu.be/UscNyRax1bI

#MagPiMonday I installed Scoppy FW on a Pico, used an old ballpoint pen as measuring tip and printed a 3d chassis fits inside an empty Freshment Dragees Box. Assembled all things. Now I have a MINI Oszilloskop for my MINI #PiMowBot and other electronics in an upcycled TicTac Box

Hi, today i got my BLDC driver ZS-X11H and it work propper in my #Hybrid #PiMowBot. I changed only 1 Modul right now. The next i will change tomorrow. I am so happy 😀😀

Hi Pi friends do you remember my idea of an #4WDriven lane mower POC from last Monday? During the last days I printed the chassis and the connetors which fits to the SG90 and wheels. Hope I find time to show next monday more #Robotics MINI #PiMowBot

Hi all, the bluetooth RC of @kevsmac burgerbot inspired me to realize a BLE Control for our #PiMowBot lawn mower. Together with @TGD_Consulting I got it up and running. The code will be available soon at GitHub. Here is the first printed case with Pico and the pico display

I just successfully built the rebol3 binary for 64-bit Raspberry Pi OS on last #MagPiMonday. So all my projects should run fine with the latest version of Raspberry Pi OS. #PiMowBot #PiTS #PiCAM #PiPS #PiEM #PiUS

Wow, only 4 control commands are actually enough for the PiMowBot to drive the figure eight. @ullisun58 told me that these are the only lines in his trip file: 54x83 M[70 70] 0:00:00.5 M[20 100] 4x4 M[100 20] 83x54 M[0 0] Every #PiMowBot user can test it by himself. Try it out:

I have again tinkered a bit with the #PicoW RC-BLE of the #PiMowBot. Now also some information of PiMowBot's telemetry is sent via #Bluetooth to the remote control. E.g. the battery voltage as shown here. Latest #Micropython code @github repository. #make #smart #RPi #robotics

Here you can find a short description and Script to calibrate a QMC5883 Modul forum-raspberrypi.de/forum/thread/4… at the end you will get the X and Y Offsets. I used this in my MINI #PiMowBot @TGD_Consulting in this Case the Offset are X -2738 and Y -768

Today I defined Frames in the css file to visualize the obsticals in front of my Alko Mower Nickname #hybrid based on Pi 3 with #PIMOWBOT IT SW. The SW is able to react depends in which frame the obstical was detected. @TGD_Consulting #Robotics #Python