#ciscomodelinglabs search results

Here's a NAT lab I cooked up tonight. It involves NAT, OSPF, Containers and DNS. I did something like this before but they were no docker containers in CML then. I love labs like this. #cisco #ciscomodelinglabs #cml #NAT #OSPF #Containers

The attached shows a simple GRE tunnel. It is always good to check the interface statistics of the tunnel to see if the packet input/output is incrementing. this guarantees that there is traffic flowing through the tunnel. #cisco #ciscomodelinglabs #cml #GRE

Here is a simpler BGP lab I've been working. It involves a single eBGP session between R1 and R2. One thing I have learnt is that BGP can get very complicated. A lot of research and practice is required to master this routing protocol. #cisco #ciscomodelinglabs #cml #BGP

I really enjoy doing labs like this Policy-Based Routing lab. You enter a configuration and you can see results immediately. My only hope is that I was able to help someone understand this topic better. #cisco #ciscomodelinglabs #cml #PBR

Having trouble with DNSMASQ in CML v2.9? Watch my new video. 👇👇👇 youtu.be/hH_SYGbTTMc Feel free to like and subscribe. #cisco #ciscomodelinglabs #cml #DOCKER #DNSMASQ

I got the DNSMASQ container to work. However, the DHCP and TFTP functionality seems to be difficult. I'll keep working on this. #cisco #ciscomodelinglabs #cml #DNSMASQ

CML RADIUS container demo video #cml #ciscomodelinglabs @LearningatCisco @CiscoVIRL

In this short video I go through the functionality of the new docker containers in CML v2.9. Feel free to like and subscribe. youtu.be/CMUrmWoA_nw #cisco #ciscomodelinglabs #cml #DOCKER #containers

I'm starting to get used to the docker containers in CML v2.9. In this screenshot I'm using the net-tools container to do a tshark on some ICMP packets. Very simple stuff. #cisco #ciscomodelinglabs #cml #DOCKER

Here are the Cisco Modeling Labs v2.9 release notes. It details everything about installing, configuring, and utilizing CML v2.9. developer.cisco.com/docs/modeling-… #cisco #ciscomodelinglabs #cml

Here is another screenshot of a simple OSPF lab. It shows the OSPF database. The "show ip ospf database" command displays the contents of the OSPF database on a Cisco router. #cisco #ciscomodelinglabs #cml #OSPF

Here's another look at the OSPF lab I was working on. I'm using an Alpine Linux node (PC1) to ping and traceroute to the far end of the network. R2 is the designated router (DR) and is receiving routes from R1 and R3. #cisco #ciscomodelinglabs #cml #OSPF

Just a simple OSPF lab. Shows an OSPF route and the neighbours. #cisco #ciscomodelinglabs #cml #OSPF

If you are at #CiscoLive and have any burning questions on #CiscoModelingLabs then come find us in the sails pavilion!

Cisco Modeling Labs is a great way to learn how Routing and Switching work with real IOS systems, including CSR routers. Personal edition is $199 - so with a 25% discount you save $50 #NetworkEngineer #CiscoModelingLabs #Cisco #ContinuingEducation #Learning #Networking

I came across the "Netmiko" Python Library today and decided to try it out. The attached shows the code I used and the output in the terminal. A simple 'show ip int brief'. #cisco #ciscomodelinglabs #cml #netmiko #python

I added two other areas to the IS-IS lab so that I could show inter-area L2 routes. I just made some changes to the System ID under the "router isis" statement to put R4 and R5 in another area. #cisco #ciscomodelinglabs #cml #ISIS

The IS-IS routes for this lab are shown on router R1. The attached image also shows the IS-IS neighbors of R2. It is very much like OSPF but for larger Service Providers. #cisco #ciscomodelinglabs #cml #ISIS

Here is a basic IS-IS lab. IS-IS is a link state routing protocol much like OSPF. I first learnt about IS-IS when I received MPLS training at C&W. Stay tuned, more to come on IS-IS in the future. #cisco #ciscomodelinglabs #cml #ISIS

Here's a look back at VRF Management. PC1 uses the VRF management interface on each router to ssh into the OSPF network in red. This is a great introduction to VRFs. #cisco #ciscomodelinglabs #cml #VRF

Here's a NAT lab I cooked up tonight. It involves NAT, OSPF, Containers and DNS. I did something like this before but they were no docker containers in CML then. I love labs like this. #cisco #ciscomodelinglabs #cml #NAT #OSPF #Containers

I really enjoy doing labs like this Policy-Based Routing lab. You enter a configuration and you can see results immediately. My only hope is that I was able to help someone understand this topic better. #cisco #ciscomodelinglabs #cml #PBR

CML RADIUS container demo video #cml #ciscomodelinglabs @LearningatCisco @CiscoVIRL

Find #CiscoModelingLabs during #CiscoLiveEMEA in the World of Solutions (near the Cisco U. Theater). Come talk to us about CML and get scanned for a 50% voucher for CML-Personal or CML-Personal Plus!

If you happen to be at @CiscoLiveAPJC and are interested in #CiscoU or @CiscoVIRL #CiscoModelingLabs 2.8 then swing by the our @LearningatCisco’s demo station

Registered!👍 #CiscoModelingLabs #CiscoLearningNetwork

If you are at #CiscoLive and have any burning questions on #CiscoModelingLabs then come find us in the sails pavilion!

Starting now! @rschmied_csco's #CML demo in the @LearningatCisco theater at #CiscoLiveEMEA. #CiscoModelingLabs ciscolive.com/emea/learn/ses…

NAT64 in effect. #cisco #ciscomodelinglabs #cml #IPV6 #NAT64

The attached shows a simple GRE tunnel. It is always good to check the interface statistics of the tunnel to see if the packet input/output is incrementing. this guarantees that there is traffic flowing through the tunnel. #cisco #ciscomodelinglabs #cml #GRE

With @Cisco offering CML Free Tier, here is a lab I'm running right now, that only uses two nodes. A Ubuntu node, with K3S Kubernetes distribution installed, connected via the external connector. Eventually adding a few extra nodes for networking. #FreeTier #CiscoModelingLabs

Bugfix release 0.5.2 for the #terraform #ciscomodelinglabs #cml provider. One bug at a time, @daniel1820815

#CML users: the #CiscoModelingLabs team is at #CiscoLiveEMEA this week with a preview of version 2.5.0. Find us in the @LearningatCisco booth on the *other* side of this demo station, which is next to the big U (from #CiscoU).

Just a simple OSPF lab. Shows an OSPF route and the neighbours. #cisco #ciscomodelinglabs #cml #OSPF

Next video coming soon, Pushing CML to the limit! How many nodes, and what types, can you run before you hit the limit? We'll look at my lab, see what it takes, and discuss. #CML #networkmodeling #CiscoModelingLabs

Here is a simpler BGP lab I've been working. It involves a single eBGP session between R1 and R2. One thing I have learnt is that BGP can get very complicated. A lot of research and practice is required to master this routing protocol. #cisco #ciscomodelinglabs #cml #BGP

I got the DNSMASQ container to work. However, the DHCP and TFTP functionality seems to be difficult. I'll keep working on this. #cisco #ciscomodelinglabs #cml #DNSMASQ

Here we go again, another iteration #terraform #ciscomodelinglabs #cml #virl provider updated. registry.terraform.io/providers/Cisc… as a side note: I got my first GH issues opened. That means... someone is actually (trying to) using it :-D

There was standing room only at @rschmied_csco's #CiscoModelingLabs demo in the @LearningatCisco Theater yesterday. Don't worry if you missed it! Talk to the #CML team and see a demo at #CiscoLiveEMEA. Visit us at the Learning & Certifications booth in The Hub.

Attached is a lab which involves NAT64. It provides stateful translations from IPv6 to IPV4. On NAT64-R1 there is a pool of addresses from 192.168.1.100 to 192.168.1.200. PC1 has an IPv6 address. Yes, NAT64 is possible on CML folks. #cisco #ciscomodelinglabs #cml #IPV6 #NAT64