#openfpgaloader 검색 결과
Hooray! I took the #tangnano20 k board donated by Sipeed in the city. 😀 #openFPGAloader is really not very friendly with this, but it will be solved one way or another
Played a bit with my @SipeedIO tang Primer 25k: - @enjoy_digital support: ✅ - #openFPGALoader: load ✅ flash: WIP
Colorlight i5 is the choice..price and power #openFpgaLoader makes it very usable...125MHz and spi 30Mhz spi oled transfer without dma 😐🤣
Just got hold of a @LambdaConcept ECPIX-5. First time using the open-source toolchain #Yosys + #Nextpnr, first time using #openFPGALoader, and first time ever using a @latticesemi FPGA. LEDs already flashing. 1hr start to finish - and no 10GB Xilinx downloads required 😀 Love it!
Loading FPGAs on a budget. The openFPGALoader project supports a wide variety of adapters. Let's review a few of the more cost-effective options for a stand alone programmer. #opensource #FPGA #openfpgaloader
I have received this tang Primer 20K + dock lite + Jtag adapter the last week! Thanks a lot @SipeedIO for the gift! Started to play with it (using @enjoy_digital LiteX) and improve #openFPGALoader @GOWIN_SEMI GW2A support. Seems CRC are differents than GW1 devices
With Baptiste Gouraud, we have added @XilinxInc Zynq Ultrascale+ MPSoC support in #openFPGALoader 🥳 I have received just in time this Alinx AXU2CGA (xczu2cg) (Thanks Jean Burgat!) 🎉
Received these two beautiful boards ! 🥳 - @SipeedIO Tang Mega 138K (@GOWIN_SEMI GW5A-AST-138) - @SipeedIO Tang Primer 25k (@GOWIN_SEMI GW5A-25A) Thanks @SipeedIO !!! 🥂 Time to play / work on #openFPGALoader and @enjoy_digital LiteX 😀
New "toy" recently arrived: @ArrowGlobal AXE5000 with @AlteraFPGA_ Agilex 5 — thanks @fpgahelper! Now: - Adding #openFPGALoader support - Adding board to @enjoy_digital LiteX First task: Where’s the JTAG programming instructions/sequences for Agilex 5? 🤔
Another #openFPGALoader update: - Added @latticesemi ECP3 (SRAM-only) support (thx M. Traxler/GSI & M. Boehmer/TUM for the board) - Added SSPI for @latticesemi ECP5 (thx @YSionneau for spotting it) - Added sponsor section — thanks everyone!
I finally got around to loading the PicoSoc demo onto the @SipeedIO Tang Nano9k board. The repo github.com/sipeed/TangNan… has a prebuilt bitstream. I used #openFPGALoader (github.com/trabucayre/ope…) to put it on the board.
#openFPGAloader becoming better and better
It's now possible, with #openFPGALoader, to use mcs file to program external flash for ECP5 #fpga target! 🥳
Well, to the authors of #openFPGALoader😂, I can only add the ability to program this board in #Yosys #nextpnr and #apicula.😉 I don't think it will take much time, I just need it to appear on Asian marketplaces so I can buy it.😆
Small #openFPGALoader's update: now MSPI is supported for @GOWIN_SEMI GW2A: - before: writing a bitstream took ~10min - now: time openFPGALoader -f top.fs real 0m9,636s user 0m0,757s sys 0m1,243s I think It's correct for a draft 🥳
Thanks to @_JCLL's feedback: @DigilentInc nexys A7 50/100 are now officially supported by #openFPGALoader (RAM and Flash) 🎉 github.com/trabucayre/ope…
new #openFPGALoader release: v0.4.0 🎉🥂 with: - new license - for most FPGA using an SPI flash: write verification and area dump to file cc: @unaimarcor
Well, to the authors of #openFPGALoader😂, I can only add the ability to program this board in #Yosys #nextpnr and #apicula.😉 I don't think it will take much time, I just need it to appear on Asian marketplaces so I can buy it.😆
New "toy" recently arrived: @ArrowGlobal AXE5000 with @AlteraFPGA_ Agilex 5 — thanks @fpgahelper! Now: - Adding #openFPGALoader support - Adding board to @enjoy_digital LiteX First task: Where’s the JTAG programming instructions/sequences for Agilex 5? 🤔
Another #openFPGALoader update: - Added @latticesemi ECP3 (SRAM-only) support (thx M. Traxler/GSI & M. Boehmer/TUM for the board) - Added SSPI for @latticesemi ECP5 (thx @YSionneau for spotting it) - Added sponsor section — thanks everyone!
@GwenhaelG And once again, thank you for your wonderful #openFPGALoader tool—without it, I would die.
Where would we be without #OpenFPGALoader? I think we would still be in the Stone Age. Thank you very much, @GwenhaelG github.com/trabucayre/ope…
seriously... just 30 mins later after flashing some sample bit streams I've bricked somehow the #tangnano20k using #openfpgaloader from @GwenhaelG 😅🤷♂️ (any tips?) "... --detect" still works but programming the flash rom results to "unknown flash" 🫣😱
Another news: @GOWIN_SEMI GWU2X (USB/JTAG only) is now supported by #openFPGALoader. lilygo T-FPGA (@GOWIN_SEMI GW1NSR-4C) too!
Needs to know @AMDembedded FPGA health/state? Now #openFPGALoader is able to readback/decode status and ctrl1 registers (when loads fails or at any time)! Thanks @colinoflynn / @newaetech for funding/sponsoring this new feature!🎇🎉 github.com/trabucayre/ope…
#openFPGALoader release v0.12.0! 🎇 Most notable evolutions: - @GOWIN_SEMI GW5A (@SipeedIO tangPrimer25k, tangMega138k) - better @latticesemi Nexus support, @colognechip improvements - webAssembly support - @AMDembedded XADC/DNA - JTAG chain fix
Loading FPGAs on a budget. The openFPGALoader project supports a wide variety of adapters. Let's review a few of the more cost-effective options for a stand alone programmer. #opensource #FPGA #openfpgaloader
Played a bit with my @SipeedIO tang Primer 25k: - @enjoy_digital support: ✅ - #openFPGALoader: load ✅ flash: WIP
Received these two beautiful boards ! 🥳 - @SipeedIO Tang Mega 138K (@GOWIN_SEMI GW5A-AST-138) - @SipeedIO Tang Primer 25k (@GOWIN_SEMI GW5A-25A) Thanks @SipeedIO !!! 🥂 Time to play / work on #openFPGALoader and @enjoy_digital LiteX 😀
Hooray! I took the #tangnano20 k board donated by Sipeed in the city. 😀 #openFPGAloader is really not very friendly with this, but it will be solved one way or another
#openFPGALoader release v0.11.0! 🎇 Most notable evolutions: - @sipeed tangNano20k, STLV7325, KCU116, ... - remote_bitbang, wch CH347, libgpiod v2 support - virtex ultrascale+ - @efinixinc SPI access (Jtag) - new SPI flash and JTAG<->SPI bridges
#openFPGALoader v0.10.0 has just been released. 🎆 Most notable evolutions: - 4 new Digilent boards - VCU118 support - LiteX-Acorn-Baseboards - EttusResearch X300/X310 - SVF player is device independant - fix path for msys2 - many others fixes and improvements
Thanks to @_JCLL's feedback: @DigilentInc nexys A7 50/100 are now officially supported by #openFPGALoader (RAM and Flash) 🎉 github.com/trabucayre/ope…
#openFPGALoader v0.9.1 has just been released.Minor maintenance: Fix pin offset for FDI's bitbang (introduces by libgpiod support, affecting @RadionaOrg #ulx3s) Adding @GOWIN_SEMI MSPI (GW2A -> @SipeedIO tangPrimer20K) 60x faster than bitbanging. see: github.com/trabucayre/ope…
Small #openFPGALoader's update: now MSPI is supported for @GOWIN_SEMI GW2A: - before: writing a bitstream took ~10min - now: time openFPGALoader -f top.fs real 0m9,636s user 0m0,757s sys 0m1,243s I think It's correct for a draft 🥳
I have received this tang Primer 20K + dock lite + Jtag adapter the last week! Thanks a lot @SipeedIO for the gift! Started to play with it (using @enjoy_digital LiteX) and improve #openFPGALoader @GOWIN_SEMI GW2A support. Seems CRC are differents than GW1 devices
Something went wrong.
Something went wrong.
United States Trends
- 1. Colts 34.7K posts
- 2. Daniel Jones 8,502 posts
- 3. Falcons 21.4K posts
- 4. Jonathan Taylor 6,633 posts
- 5. Penix 6,294 posts
- 6. Bijan 4,982 posts
- 7. Drake London 3,694 posts
- 8. Mooney 2,872 posts
- 9. Konate 15.5K posts
- 10. Max B 17.3K posts
- 11. Raheem Morris 1,709 posts
- 12. Liverpool 154K posts
- 13. #ForTheShoe 2,408 posts
- 14. Tyler Warren 1,099 posts
- 15. Zac Robinson N/A
- 16. Pitts 3,913 posts
- 17. Tyler Allgeier 1,414 posts
- 18. $LMT $450.50 Lockheed F-35 N/A
- 19. $APDN $0.20 Applied DNA N/A
- 20. $SENS $0.70 Senseonics CGM N/A